• 7.6KG (16.8lbs);
  • 689 H x 300 W x 201mm D

Typical Uses:

  • Concrete Drying
  • Carpet Drying
  • Timber floor Drying
  • Target Drying
  • Dimensions: 689 H x 300 W x 201mm D
  • Weight: 7.6KG (16.8lbs)
  • Housing: Polyethylene

Drymatic Boost Bar Hire

  • 7.6KG (16.8lbs);
  • 689 H x 300 W x 201mm D

The Drymatic Boost Bar provides the ability to effectively deliver heat as a means of drying. It does this by attaching to an air mover and heating the air. Connected to heat mats, it targets the heat directly to the structure, for effective drying.

$275.00 Per Day Incl. GST

Day based pricing : Drymatic Boost Bar Hire
$275.00 / days
Pickup Date:
Return Date:
Quantity
×

Please check if all fields are filled out.

Hire SKU: 215004

(0)

Drymatic Boost Bar is an Adaptable Heat Drying System designed to reduce drying times. The machine is placed in front of an air mover to heat airflow in a drying environment and can also be used with Drymatic Wall & Floor Systems to effectively target dry specific areas of water damage. The addition of controlled heat increases drying performance in a water damage project; it also helps to enhance the performance of conventional drying equipment, such as refrigerant dehumidifiers, where temperatures are often below optimum operating conditions.

How it works:
Raising the temperature of the water damaged materials increases their vapour pressure and subsequently gives the material more potential for evaporation, resulting in more efficient drying. The DBK Drymatic Boost Bar has an intelligent control system that regulates its output to ensure that the temperature stays within the dialled-in range by varying the power of the
heating device. The Drymatic Boost Bar, when combined with a Drymatic Wall & Floor Accessory System or Drymatic Boost Bar Attachments, becomes an extremely effective target drying solution. Target drying focuses the heat energy on a specific area of water damage, allowing the technician to remain in full control over what materials are dried and to what temperatures they are
exposed. In many cases a restoration project will include a variety of different materials that need to be dried in different ways; target drying enables the controlled application of heat and airflow which results in vastly improved drying times.

LONG TERM DEALS

Only 4 out of 7 Days Charged. We do not charge freight days.

  • Adds up to 2.2kW (1.8kW for Australian or Scandinavian Models, 1.4kW/4,780 BTUs for USA models) of heat energy into the room to reduce drying time.
  • Three intelligently controlled self regulating PTC heater banks that raise room temperature up to a maximum of 50°C (122°F).
  • Touch screen controller which displays incoming and outgoing temperature, kWh and hours run.
  • Airflow detection and power regulation to ensure safe operation whilst adding maximum power in any event – CE/UL Approved. (See about PTC Elements Page)
  • Bi-directional design can be operated with any standard styled air mover with the machine either flat or on its side.
  • Allows users to attach a huge range of Drymatic Wall and Floor System mats and accessories to quickly and efficiently dry small areas.
  • Compact, lightweight and rugged construction which is stackable for easy transportation and storage.
  • Fixed cord with built in cord wrap for plug in and go operation.

Typical Uses

  • Concrete Drying –
    With deeply bound water in concrete, it takes a more target approach to dry out the moisture. By engergising the concrete floor with heat, you are able to increase the rate of evaporation of the material.
  • Carpet Drying –
    By heating the carpet, you will be able to dry it out faster and more efficiently.
  • Timber floor Drying –
    Timber floor drying can be tricky, with the use of a boost bar and mats, its possible to dry the multilayed timberflooring by injecting heat.
  • Target Drying –
    By using this in conjuction with a proportionally sized mat, you can dry areas with a much more targeted approach, making you the dry process faster and more efficient.

Reviews

There are no reviews yet.

Be the first to review “Drymatic Boost Bar Hire”

Your email address will not be published. Required fields are marked *

About the Heating Elements

Drymatic Boost Bar uses PTC heating elements to provide efficient and controllable heat. These elements self-regulate their power output depending on the volume of airflow passed over them and also the elements operating temperature. This means that if airflow is restricted the heater will continue to function but with reduced power; protecting both the Boost Bar and the material being targeted. In the event that airflow is completely lost the system will shut the elements down.

The 6 elements you see through the grill (5 for Australian/Scandinavian models) are divided into 3 banks of elements which the software ramps up and down in order to 1) Gradually increase the heat and 2) Control the temperature of the room.

The elements are electrically insulated and safe to use in humid/dusty conditions however they can get hot and should never be touched.
If the display is showing all three banks running but the power output is less than expected check for any restrictions in airflow or move the air mover closer to ensure that full power can be reached.

Storage and Stacking

  • When finished with the machine the fixed mains cord can be wrapped around one of the inlets/outlets and the plug can be clipped into cord retainer as shown. The cord can be wrapped in either direction.
  • Units can be carried by the handle on the top allowing an operator to carry two at a time with ease.
  • Units can be stacked in pairs to form a 8 unit high tower (16 units in total ~1.6m)

Note: Units should not be operated when stacked and the cord should always be fully unwound when in use. They should be fully secured when in transit to prevent causing harm or damage.

Weekly: