The Tramex Concrete Moisture Encounter X5 or also known as CMEX5 is a strongly built, high quality digital moisture meter used for concretes or solid surfaces such as floors and slabs. It also measures Ambient Relative Humidity, Temperature, Dew Point, and Humidity Ratio (or Mixing Ratio) of the environment through the use of its Hygrometer feature. Aside from that, it also lets the user measure relative humidity in concrete as per ASTM F2170 by being able to attach wood pin probes or Tramex Hygro-i2 Relative Humidity Sensors through its bayonet plug-in port. To avoid further water damage, the external pin and Hygrometer best fit testing the following:
- concrete and flooring for professionals in the concrete coatings
- wood flooring
MODES
- Non-destructive test (NDT) mode: The Tramex Concrete Moisture Encounter X5 is a non-destructive digital multi moisture meter for concrete floors and slabs providing instant and precise quantitative measurement of moisture content using Gravimetric testing as a baseline. The CMEX5 also provides Carbide Method equivalent readings for concrete and anhydrite/gypsum substrates and screeds, as well as comparative readings as per ASTM F2659.
- Hygrometer mode: The Tramex Concrete Moisture Encounter X5’s built-in Ambient Relative Humidity Sensor measures Ambient Relative Humidity, Temperature, Dew Point, and Humidity Ratio (or Mixing Ratio) of the environment.
- Equilibrium Relative Humidity mode (optional plug-in probe): Using the optional plug-in Hygro-i2 RH probes, the CMEX5 concrete moisture meter will measure Equilibrium Relative Humidity, Temperature, Dew Point and Humidity Ratio in structural materials. A structural material such as a concrete slab can be tested using the in-situ method or RH Hood methods (International Standards: ASTM F2170 & BS 8201, 8203, 5325). Relative Humidity Probes can also be used for ambient RH measurements within air spaces.
- PIN Meter mode (optional plug-in probe): The Tramex CMEX5 concrete moisture meterbecomes a resistance type meter and measures the percentage moisture content (%MC) of wood when used with the optional plug-in PIN meter. International wood standards or pre-programmed wood species can be selected. PIN meter mode can also be used for Drywall and WME (Wood Moisture Equivalent) readings for other building materials.
How it works
Tramex Concrete Moisture Encounter X5 detects and evaluates the moisture conditions within the slab or screed by non-destructively measuring the electrical impedance. A low frequency electronic signal is transmitted into the material under test via the electrodes in the base of the instrument. The strength of this signal varies in proportion to the amount of moisture present in the material. The Concrete Moisture Encounter X5 determines the strength of the current and converts this to a moisture content value for concrete slabs and a comparative value for other cementitious floor screeds, displayed on a large clear digital dial.
CMEX5 also offers the following features:
- using Gravimetric testing as a baseline, the CMEX5 shows an accurate moisture measurement result
- can measure concrete floors and slabs roughly 20mm deep
- offers quantitative Carbide Method equivalent readings for Concrete and Anhydrite/Gypsum substrates and screeds
- compare readings by using two reference scales which best fits for moisture testing based on ASTM F2659
The use of the CMEX5 can be extended with the optional Concrete Moisture Probe which measures in-situ quantitative moisture content within the concrete to an extendable depth of up to 4″ (100mm).
Moisture Mapping & Data Documentation
In order to easily share data, CMEX5 results can also be used moisture mapping and gathering reports and data through the Tramex Meters App . Bluetooth connectivity to mobile devices also helps to GeoTag test results, create, save and share photos.
Reviews
There are no reviews yet.