Introducing IAQ Pro’s Zephyr Axial Fan stands. These stands provide the IAQ Pro Zephyr Axial fans with a 360∘ rotation on the vertical axis. This means you can target dry specific areas such as ceilings or directly down on the floor for maximum drying effect. Pointing the zephyr axial fan directly down will target dry directly underneath but at the same time also disperse that 2000 CFM of air flow in a 18m radius around the unit. This ends up multiplying the effectiveness of your zephyr air mover by more efficiently directing your airflow to more surface area.
To install, simply unscrew the bolts placed in the frame, and screw them into the holes in the side of the Zephyr Axial fan. Allow room on the bolts (do not screw them all the way in) as they are what hold up the weight of the fan. Slow these bolts into the grooves of the a frame near the top. Once placed in, you can tight these bolts all the way, when you have decided the angle you want the air mover to point at. Tighten full once satisfied. These screws come with useful handles so that they can be installed without tools.
Features
- Lightweight & collapsable
- Screws come with handles for tooless install
- Enable the Zephyr Axial Air Mover to point in any 360 degree angle for target drying
- Pointing air mover straight down allows 360 degree dispersal of air for maximum affected surface area.
NOTE: Zephyr Axial Air Mover / Fan is sold separately to the stand.
Reviews
There are no reviews yet.